Backup camera grid lines disappear |11 Big Root Causes and Fix

Backup Camera Grid Lines Disappear either for jeep , toyota or other vehicle due to Bad camera module, Faulty wiring, Dirty lens, imporper installation,Open tailgate, Damaged Hardware and Trailer hooked up or Trailer Plug Adapter.

if the Camera Grid line are active then no issue but if lines disappeared then there will in issue in vehicle.

Also Read: The digital odometer display not working

Backup camera grid lines disappear Reasons

The following are possible reasons:

1. Bad Backup Camera Module

Backup Camera Module goes towards any failure then Backup camera grid lines disappear.

Basically this module convert data from camera or other sensor into useful data.

Solution: Scan the camera for fault gode at at AutoZone or NAPA stores or consult some mechanic for manfacturer specific fault codes.

2. Improper Installation

Imporper installation also cause Backup camera grid lines disappearing. New vehicle modle like Chevy Equinox 2013 affect the backup camera because of incorect settings.

Solution: Must ensure proper installation form proper mechanics.

3. Dirty Lens, Loose Connection

Ditry lens , loose connection of camera components also caluse disappering grid lines.

Solution: Clean camera lens with microfile cloth or with lens cleaner.

4. Faulty Wiring

Damaged wiring or moisture damage is another reason of disappearing grid lines.

Solution: Check for signs of moisture damage. Check the wiring; if it is damaged, then repair the wiring.Also hink about changing the camera if necessary.

5. Backup Camera Module Requires a Reset

Jeeps backup camera grid lines disappear some time due to defective camera moulde and you need to reset it again and again.

Solution: Hold volume and tube for 15-20 second and reset backup camera.

6. Damaged Hardware

Grid lines disappear due to damage of stabilizer, lens, or some other component.

Solution: Check the camera frequently , if damage then replace it.

7. Backup Camera Module Time to Boot Up Issue (Ford)

Older Ford models 2010-2015 has issue in camera module for insufficient time to reset during startup.

Solution: Recalibrate camera for 10 second in startup. Complete bootup after shift gears.

8. Grid Lines Turned off accidentally

Often, other drivers accidentally turn off grid lines.

Solution: Investigate may be grid line disappers due to disabling , read vechicle manual that how to turn on grid lines using infotainment system or guage cluster screen.

9. Open tailgate

If the tailgate is open, the angle of the camera changes, which affects the accuracy of the grid lines.

Solution: Check that the tailgate is securely closed.

10. Trailer hooked up or Trailer Plug Adapter

The backup camera line will not work if the trailer is connected. Backup camera grid lines disappear if a trailer plug adapter is used.

Solution: You should unplug the trailer or trailer plug adapter. You should also check and clean the trailer plug for proper connection.

11. Defective Backup Camera Equipment

Poor Quality of backup camera can make a blank screen and disappear grid line or images.

Solution: Replace the backup camera with a new one and purchase it from reliable sources.

12. Accidents

A normal crash can disconnect the connection between the backup camera and vehicle hardware system, which can result in the disappears of grid lines.

Solution: Regular miniotor damage or loss of connection due to accident. You should find professional mechanics to restore functionality.

Conclusion

back camera grid lines disappear jeep or back camera grid lines disappear toyota or any other vehicle occurs , you shoul diagnosis and do regular maintenance , cleaning.

Read you vehicle’s manual and save your backup camera from disappears of Grid lines.

if the issues still exists the take hlep of some professional assitance.